NOTE FOR HONDA CB500X OWNERS UP TO 2018:
After extensive trials these are the ONLY handguards that WE have found work in conjunction with the Renthal 609 RC High Fat Bars and our Fat Bar Riser kit for the CB500X, and still clear the screen, in the lower position, at full lock.
If you require the screen in the raised position, we can supply a Spacer Kit to enable this.
NOTE FOR HONDA CB500X 2019 OWNERS:
Due to the thinner wall thickness of the steel OEM Fat Bars, the diameter of the bar end inserts supplied with the Barkbuster Kit are slightly small, as they are designed to fit thicker walled aluminium Renthal Fat Bars, so we supply a specially machined pair of inserts to fill the gap.
NOTE FOR BMW G310GS OWNERS:
After extensive trials these are the ONLY handguards that WE have found work in conjunction with the Renthal 609 RC High Fat Bars (RRP 484/485) and our Fat Bar Riser kit (RRP 825) for the BMW G310GS with either our Sport Screen (RRP 848) or our Adventure Screen (RRP 849) , and still clear the screen at full lock.
THEY WILL HIT THE OEM SCREEN AT FULL LOCK
The very long OEM levers do not fit inside the Barkbuster metalwork. We have found that it is possible to run the levers slightly underneath the metal frame OR trim the last 20mm off the levers, where the slot is, and the file the cut end. This will then allow the levers to fit behind the metalwork, for maximum protection.