The Mount-Kit-Only includes everything except the stabilizer and link arm. This kit is designed to be used with the stock triple clamp and oversize handlebars. The SUB mount shown here in black, bolts to the stock triple clamp. The stock lower perches then bolt to the SUB mount allowing the stabilizer to slip in under the bars. The SUB mount allows the bars to be run in positions #3 and #4, a little further forward than standard.
"SUB" mount stands for Stabilizer Under Bars, originally designed for raising the bars. This concept allows more room for other equipment such as, Global Positioning Systems(GPS) or Enduro/Rally computers and yet still retain the quick access for adjusting the stabilizer. This is also good for the taller rider who wants his bars a little higher, as it raises the bar location approximately 11-25mm, depending on the model of bike. In some cases, you might consider a lower bend handlebar bend at the same time, unless you are trying to achieve a higher bar height along with your stabilizer installation. Each SUB mount comes complete with all necessary parts, hardware and "Step by Step" pictured instructions.
NOTE: NOT SUPPLIED WITH SCOTTS STEERING DAMPER-RRP 031(AVAILABLE SEPERATELY)
SCOTTS PT. NO. DM-SUB-5930-02
TO SUIT HUSQVARNA FE 501 & 350, 2020 MODEL YEAR.
KTM MODELS, ALL 2020 MODEL YEAR:
500 EXC-F 6 DAYS
350 EXC-F W
300 TPi XCW
300 TPi XCW 6 DAYS
300 TPi XCW ERZBERG
IF IN DOUBT ABOUT MODEL SELECTION, CHECK SCOTTS DATABASE ON THEIR WEBSITE: SCOTTS DAMPERS