CB500 X/F/R Billet Footrest Adaptor - RRP 760

Product Code: RRP 760
Availability: 2

Price: £50.00
Ex VAT: £41.67

Qty:

- OR -

Add to Wish List
Add to Compare

Description Related Products (1)

Machined in house from billet aluminum, these neat adaptors allow you to upgrade your existing OEM footrests for offroad and touring use.

With an increase of approx 50% more surface and 2mm lower than OEM, these wider and longer adaptors use 10 high grip stainless steel grub screws in each side that can also be removed or replaced to suit the riders needs.

Finished in a hard natural anodise with corrosion resistant hardware they are designed to offer far better performance whilst maintaing an "OEM" look.

if you wish to return the footrests to OEM form this can be done by simply unbolting the adaptor and replacing OEM rubber piece.

Important Note : To fit these adaptors you must drill the OEM footrest holes from 5.6mm to 6mm. If you do not have a 6mm drill please see related products or RRP 798

CB500 X/F/R BILLET FOOTREST ADAPTOR FITTING INSTRUCTIONS

Unbolt OEM rubber cover from the underside of the footrest using an 8mm socket.

Remove OEM rubber cover from footrest.

Using a 6mm drill, drill both holes in the footrest casting and remove any debris.

Place the billet adaptor over the cast footrest and place M6x30 bolts provided into the footrest.

Secure using M6 washer and nyloc nut on the underside, tighten to approx 16NM.

Tags: CB500X, FOOTREST, FOOT, REST, ADAPTOR