We have designed this Fat Bar Riser kit design to work with the OEM cast top triple, and means it can be converted from the OEM Bar size (7/8" diameter) to work with the RC High Bend 609 Renthal Fat (1-1/8") Bars, and although the risers are higher than standard, this is to compensate for the lower profile of the RC High bend Fat Bars, which give a similar overall height as the OEM steel bars.
This kit, in conjunction with the Renthal 609 RC High Fat Bars, will allow fitment of the Barkbuster Storm or VPS handguards, and either of our screens (RRP 848/9) would need to be fitted in order that the handguards do not clash with the screen at full steering lock.
Also included is a Billet Top Clamp to give maximum rigidity, and this also incorporates a set of M4 screw holes, 38,2 X 30,6mm centres, to either fit a Garmin GPS mount directly, or the circular or triangular RAM ball mounts.
The Lower Clamps are reversible, so that the bar position can be moved 10mm forward or back.
It is possible to raise the bars a further 10 or 20mm using our Bar Packer kit RRP 826.
Also available, separately, is a laser cut stainless steel plate (RRP 534) that can accept 12volt cigarette type socket or USB socket, ideal for charging appliances.
All CNC machined parts are hard anodised natural finish and come complete with new M10 x 80 low head CHS, and new M10 nyloc nuts and washers.
NOTE: DISCARD OEM SCREWS AND NUTS, BUT RE-USE OEM THICK WASHERS, TOP AND BOTTOM.