Level 2 Suspension Kit CB500X 2019-RRP 743

• Rear shock: Long-travel (+20mm over stock) Adventure shock - high-quality aluminium body with adjustable preload - together with a remote reservoir that offers additional capacity, and separates the damping controls - featuring independent 100% high and low speed compression damping adjusters on the remote, and a dedicated 100% rebound adjuster on the shock body lower fork. Includes RRP mounting bracket for the remote reservoir by the right rear passenger footrest.  Shockbody design allows for the fitment of the Tractive PreLoad Adjuster see RRP 739.

• Choice of spring rates, 100Nm,110Nm(standard) & 120Nm.

Spring rate guidelines:

• Adventure rear suspension linkage : Billet aluminium linkage bone(with OEM bearings & seals) and heavy-duty steel side plates to retain correct suspension geometry.

• Front forks: Replacement internal components - longer, linear-wound Tractive springs (that eliminate the 6” OEM plastic spacer), available in 2 spring rates, 5.0Nm (standard) & 5.5Nm. If you are selecting the 120N/mm shock spring we suggest you select the  5.5nm fork spring.      

• Adventure +20mm travel RRP damper-rods with built-in shim stack valving.
• Replacement Side Stand (+35mm)

The new design of Tractive shock body allows for the fitment of their Hydraulic Preload Adjuster RRP 739.

We recommend this option, as on ABS model bikes it is very difficult to access the preload ring and turn it using the tool provided.

It will allow the preload to be adjusted by up to 10mm with the simple turning of a knob on the remote adjuster, which adjusts the preload on the spring by means of hydraulic pressure.

It is a very simple, quick way to adjust the preload when carrying extra luggage, or a passenger, or going from street to off-road travelling.

No more hammering away at the OEM preload adjuster locknut, and struggling to turn it.

Simple to fit, and no maintenance required.

Supplied with all fixings.

If ordered with shock, we will fit the Hyd Preload Adjuster and correct shock spring at our factory before despatch.

2 year TracTive warranty

Rally-Raid Products Ltd are the UK distributor for Tractive Suspension, and also their nominated Service Agent in the UK, with all necessary tools and equipment to offer buyers a complete technical service and repair facility. This includes stocking all genuine Tractive Suspension shock absorber spare parts, along with their own design of vacuum pump, to enable the shock to be bled 100% when re-filling with oil.

Tractive Shock Fitting Instructions

Rear Shock Pre load setting Instructions

Fork Fitting Instructions

Std shock settings:

Preload............................11 turns on (from just touching free spring length with shock removed)

Rebound.........................10 clicks out (from fully wound in)

HS Compression............10 clicks out (from fully wound in)

LS Compression.............10 clicks out (from fully wound in)

Tractive Shock Pt.No. 38HO19-T6112

TRACTIVE SUSPENSION MANUAL LINK