The kit includes everything except the Scotts steering stabilizer (RRP 031). By utilizing specially designed Poly-Urethane bushings we can offer a vibration dampening handlebar mount that will prevent arm pump and dramatically reduce rider fatigue. MED and SOFT bushings are provided. The frame bracket mounts around the stock ignition switch and blends in nicely with the white frame. All pieces are engineered for a clean fit. slight trimming of plastic shroud covering key area is required. The sub mount raises the bars 11mm and locates them between the #2 and #3 positions on the triple clamp.
To fit Husqvarna 701 Enduro/SMC 2016-on, and KTM 690 Enduro/SMC 2019/20 ONLY.
Scotts Pt. No.DM-SUB-3529-01R
IF IN DOUBT ABOUT MODEL SELECTION, CHECK SCOTTS DATABASE ON THEIR WEBSITE: SCOTTS DAMPERS
NOTE; THE STD LINK ARM FITTED TO THE DAMPER UNIT NEEDS TO BE REPLACED WITH A SHORTER, SLOTTED ARM (SUPPLIED WITH SUB MOUNT KIT).
IT IS PREFERABLE TO DO THIS WITH THE GENUINE SCOTTS LINK ARM PULLER, RRP 290, BUT IT CAN BE REMOVED USING A 15MM SPANNER TO UNDO THE HOLDING NUT, THEN GENTLY LEVER THE ARM FROM THE DAMPER SHAFT, USING A FLAT-BLADE SCREWDRIVER, OR SIMILAR, BEING CAREFUL NOT TO SCRATCH THE DAMPER.
FIT NEW DAMPER ARM AND REPLACE CENTRE NUT, APPLYING A SMALL AMOUNT OF LOCTITE TO THREADS.