Yamaha T7 Fork Preload Caps-RRP 614

Our own design of billet Fork Preload Adjusters were developed by us to improve the adjustability and personalisation of the Yamaha T7 Tenere fork set-up.

They replace the OEM fork caps, whilst still retaining the rebound adjustment in the top, and offer up to 11mm of fork preload adjustment on each leg, to achieve the optimum sag settings in order to get the best performance both on, and off-road.

By simply turning the centre 22mm hex, using spanner provided, each turn can add, or remove 1mm of preload.

Simple, and straightforward to fit, a special pin spanner is provided to fit, and remove the caps.

These will work with OEM KYB forks, both with OEM fork internals, or our Open Cartridge Fork Kits, RRP 616.

Hard anodised black aluminium outer, with stainless-steel internals.

Fitted with M3 csk bleed screws (different to M4 screws on OEM cap).

Plastic spacers (4 x 5mm & 2 x 2mm thickness) are included for extra preload, if required, up to 12mm extra preload per cap.

DOES NOT REQUIRE ANY CHANGES TO FORK INTERNALS

Tractive Pt.No. 80YA19-V9013

FITTING INSTRUCTIONS